Complete pack recirculating ball bearing traveller systems

Pre-packaged mainsheet systems with all components required in one complete kit – sliding bolt track, traveller, end fittings, plastic end caps, pilot track and full fitting instructions.

Travellers, end fittings and track are all extruded from top quality marine grade aluminium and finished in our unique 'Spectro' grey anodised finish.

Sliding bolt track allows for a smooth, clean profile and also makes retro-fitting easier as bolts can be slid along the extrusion to match existing fastening holes.

  • Two sizes – for yachts up to 11m LOA (36ft)
  • 2:1 or 4:1 purchase systems
  • Recirculating precision ground delrin ball system.

Specifications Size 1 Size 2
Max Boat Size Max Boat Size 8.5m
28.5ft
11.0m
36ft
Track Width Track Width 20mm 26mm
Track Length Track Length 1.4m 1.6m
Max control line Ø Max control line Ø 6mm 8mm
SWL SWL 500Kg 700Kg
Fastenings Fastenings 5mm 6mm

Guide to choice of size:

Size 1 for yachts up to 8.5m (28.5ft)
Size 2 for yachts up to 11.0m (36ft)

Traveller Car

Important note: boat sizes

Suggested boat sizes are given as guidance only and assume a monohull with boom end sheeting, loaded vertically to the traveller.

Mid-boom sheeting and severely angled take offs can impose greater loads and suitable allowances should be made for this. If at all unsure of your choice it is important to seek further advice.

If you are close to the maximum boat size suggested, we would advise upgrading to the next size up.

Complete pack kits are not suitable for open span applications as they require beam section track – click here.

2:1 Purchase Kit2:1 Purchase Kit

with cleats at 70° on end fittings

  • 1.4m (size 1) / 1.6m (size 2) sliding bolt track
  • Traveller car with single shackle take off
  • End fittings (pair)
  • Plastic end caps (pair)
  • Pilot track & fitting instructions.

Size 1   Size 2
20 900   24 900

4:1 Purchase Kit4:1 Purchase Kit

with cleats at 70° on end fittings

  • 1.4m (size 1) / 1.6m (size 2) sliding bolt track
  • Traveller car with single shackle take off
  • End fittings (pair)
  • Plastic end caps (pair)
  • Pilot track & fitting instructions.

Size 1   Size 2
20 901   24 901

4:1 Purchase Kit4:1 Purchase Kit

with cleats on traveller

  • 1.4m (size 1) / 1.6m (size 2) sliding bolt track
  • Traveller car with single shackle take off
  • End fittings (pair)
  • Plastic end caps (pair)
  • Pilot track & fitting instructions.

Size 1   Size 2
20 902   24 902