Products
Follow the links below to see our products;
 |
Size
0 blocks SWL 300kgs Sheave Dia: 20mm Max Rope Dia: 6mm |
 |
Size
1 blocks SWL 350kgs |
 |
Size
2 blocks SWL 370kgs Sheave Dia: 35mm Max Rope Dia: 8mm |
 |
Size
3 blocks SWL 385kgs Sheave Dia: 45mm Max rope Dia: 10mm |
 |
Size
4 blocks SWL 630kgs Sheave Dia: 58mm Max Rope Dia: 12mm |
 |
Size
5 blocks SWL 750kgs Sheave Dia: 54mm Max Rope Dia: 12mm |
 |
Size
6 blocks SWL 1000kgs Sheave Dia: 60mm Max Rope Dia: 12mm |
 |
Size
7 blocks SWL 1250kgs: Sheave Dia: 70mm Max rope Dia: 14mm |
 |
Wire
rope blocks Sheave Dia from 35mm Wire from 3mm to 5mm |
 |
Stainless steel blocks 3 sizes from 6mm - 10mm max rope dia. SWL up to 400kgs |
 |
High Load blocks & Foot Blocks Sheave Dia: 50mm Max rope Dia: 18mm |
 |
High Load Low Friction Eye/Ring Available in 6 sizes. Manufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising. |
 |
Snatch blocks SWL up to 650kgs Max Rope Dia up to 16mm |
 |
DO 550 Clutches An all new design for cruising and racing yachts, offering a holding power of up to 550Kgs. |
 |
Inspection covers Including Screw, Push Fit and 'T' Lock type |
 |
Deck organisers, rope clutches and mast base organisers Clutches suitable for line up to 10mm |
 |
Sail
handling Lazy Jack Kits, Mast Steps, Slab Reefing Kits, etc. |
 |
Ball-Bearing Complete Traveller System 2 sizes for yachts up to 10m |
 |
Dinghy Traveller Recirculating Delrin ball |
 |
Ball-Bearing Mainsheet & Genoa Car Systems Three sizes for yachts to 15m / 50ft loa. |
 |
Removable Mainsheet Systems Available in 2 sizes for yachts up to a maximum of 11.0m (36ft) |
 |
Genoa
Cars & Sliders for 20mm 'T' Track Suitable for larger dinghies, Dayboats and light cruiser/races. |
 |
Ball-Bearing Mainsheet & Genoa Car Tracks Three sizes for yachts to 15m / 50ft loa. |
 |
Genoa Cars & Sliders for 25mm 'T' Track With moulded slide inserts to ensure free running under load. |
 |
Mainsheet Travellers & Tracks for yachts up to 7.3m (24ft) loa. Stainless Steel Captive Bearing Wheel Race. |
 |
Genoa
Cars & Sliders for 32mm 'T' Track With moulded slide inserts to ensure free running under load. |
 |
Mainsheet Travellers & Tracks for yachts up to 10.5m (35ft) loa. Stainless Steel Captive Bearing Wheel Race. |
 |
Special
cleats Including: Sliding, Clamp On, Shroud and Stanchion cleats |
 |
Mainsheet Travellers & Tracks for yachts up to 15m (50ft) loa. Stainless Steel Captive Bearing Wheel Race. |
 |
'K'
Cam cleats With max line Dia up to 14mm Holding Power up to 260kgs |
 |
Winches
and winchers Nautilus Winches, single speed, 8:1, two speed 16:1 and 23:1. Winchers to convert standard winches to Self Tailing. |
 |
Winch handles & accessories Including Aluminium handles, Floating handles, Handle pockets & holders. |
 |
General chandlery Including: Clevis Pins, Safety Rings, Pad Eyes |
 |
Aluminium Tiller Extensions Tiller Extensions from 600mm to 1200mm |
 |
Carbon Tiller Extensions Carbon Tiller Extensions from 600mm to 2100mm |
 |
Boomstrut |
 |
Dinghy & dayboat fittings Including: Fairleads, drain Bungs, Dinghy Track, Rudder and Transom Fittings. |
 |
Fairleads, cleats and thimbles Including: Open, Tubular, Aluminium Cam and Budget Cleats |
 |
Replica Laser Kits Replica Laser kits which include; Replica 15;1 Kicking strap assembly, Outhaul, Mast base, Cleat base and Cunningham |
 |
Shackles, Sheaves, springs and V Bolts Including Shackles, Sheaves, S Hooks and V Bolts. |
 |
The Clamseal The award-winning, patented ClamSeal™ - repairs inflatables fast - even when wet. |
 |
Fuel Whistle A simple device to prevent accidental spillages whilst refuelling. |
 |
Wear pads and Rubbing Strakes |