for yachts up to 15m (50ft) LOA
A range of traveller systems for larger yachts up to 15m LOA
running on our heavy-duty track. Four and six wheel travellers
should be used on boats up to approximately 12m LOA;
the eight wheel models are for larger craft. Please see
note marked *.
All feature heavy-duty attachments, through-bolted for added
security. Control line blocks (where fitted) have low friction
ball bearing sheaves, accepting lines up to 10mm diameter.
'I' section track is silver anodised. Fittings are black anodised.
End fittings are secured through track with track
fastening bolts.
- Stainless steel captive bearing ball race wheels
- Four, six and eight wheeled options
- Rugged, lightweight 'I' section track
- Cam cleat versions feature 'K' cam Kevlar cleats
- End fittings give varied control line options
- Ball bearing control line blocks.
*Note: for yachts over 12 metres our eight wheeled travellers must be used.
These are made to order so please state requirements when ordering.
28mm 'I' section track
Extruded with a hollow section for light weight and high load capacity.
Drilled for fastenings and plunger stops.
Supplied in metric lengths as shown in the table below.
Specifications & dimensions | ||
![]() |
Width W | 28mm |
![]() |
Height | 34mm |
![]() |
Width X | 17mm |
![]() |
Fastenings Ø | 6mm |
![]() |
Fastening centres | 100mm |
![]() |
Plunger hole centres | 50mm |
![]() |
Weight | 1041g per m |
Part No. |
|
28mm I section track | |
per metre | 28 000 |
0.6 metre | 28 010 |
1.2 metre | 28 020 |
1.8 metre | 28 030 |
2.4 metre | 28 040 |
3.0 metre | 28 050 |
5.0 metre | 28 060 |
Track end cap (pair) | 28 901 |

Important note: boat sizes
Suggested boat sizes are given as guidance only and assume a monohull with boom end sheeting, loaded vertically to the traveller.
Mid-boom sheeting and severely angled take offs can impose greater
loads and suitable allowances should be made for this. If at all unsure of your choice it is important to seek further advice.
Crash stops should be used to prevent cars from damaging track and end fittings.
![]() |
![]() |
![]() |
||
Part No. |
Length mm |
Width mm |
Weight g |
|
28mm track end fittings (pairs) | ||||
End fitting with sheave, becket & cleat | 28 110 | 108 | 90 | 620 |
End fitting with double sheave & cleat | 28 111 | 108 | 90 | 716 |
End fitting with double sheave, becket & cleat | 28 112 | 108 | 90 | 724 |
Adjustable plunger stops | 28 900 | 35 | 34 | 112 |
Plastic track end | 28 901 | - | - | 42 |
Crash stop | 28 902 | 35 | 34 | 76 |
![]() |
![]() |
![]() |
![]() |
![]() |
|||
Part No. |
End Fitting |
Length mm |
Width mm |
Break Load Kg |
SWL Kg |
Weight g |
|
28mm traveller cars | |||||||
4 wheels plain | 28 101 | 28900 | 88 | 54 | 2522 | 1250 | 438 |
4 wheels, control line sheave | 28 102 | 28110 | 88 | 54 | 2500 | 1250 | 472 |
6 wheels, control blocks 2:1 purchase | 28 103 | 28110+28902 | 245 | 54 | 3400 | 1700 | 850 |
6 wheels, control blocks 3:1 purchase | 28 104 | 28111+28902 | 272 | 55 | 3400 | 1700 | 864 |
6 wheels, control blocks 4:1 purchase | 28 105 | 28112+28902 | 245 | 55 | 3400 | 1700 | 951 |