-
- I Section Track & Travellers, Traveller Systems
19mm 6 Wheel Main Sheet Traveler Car 19105
- A robust 6 wheel traveler car for 19mm I beam track complete with sheaves for control lines.
-
- Accessories, Special Cleats
25mm Stanchion Cleat 52100
- Designed to fit 25mm stanchions or pushpit/pulpit tubular structures this easy to fit cleat is a great solution for line handling, wherever you need it. The Nylon jaws will not damage the tube or stanchion.
-
- Furler Accessories
25mm Stanchion Ratchet Block
- New for 2025 our robust and reliable 25mm Stanchion Ratchet Block 60160. Beautifully engineered and easy to use, this ratchet block makes jib furling a doddle.
-
- I Section Track & Travellers, Traveller Systems
4 Wheel Traveler Car for 28mm I Beam Track 28102
- A robust wheel traveler car for 28mm I beam track complete with sheaves for control lines.
-
- Blocks
Baby Splice Splicing Kit 62053
- This handy splicing kit comes with three short needles or fids and the hand tool and is suitable for splicing line up to 4mm. Instructions included.
-
- Bulkhead Pipe Glands
BPG-50 Bulkhead Pipe Gland Fitting 50mm OD
- The Barton Bulkhead Pipe Gland Fitting BPG-50 can be used with multiple pipe and tube sizes with an outer diameter between 45-50mm (1 3/4 - 2"). The required hole cutter is 60mm. The BPG-50 has 4 M6 fasteners supplied. These fittings provide water and vapour tight seal between bulkheads. They are flexible and can accommodate some curved surfaces and pipe…
-
- Bulkhead Pipe Glands
BPI-20 Bulkhead Pipe Gland Fitting Reducer 20mm for BPG-50
- This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland Fitting. This will accept pipes between 18.5-20mm. These fittings provides a water and vapour tight seal between bulkheads. They are flexible and can accommodate some curved surfaces and pipe entry at an angle of up to 15 degrees. They are easy to fit and fully…
-
- Bulkhead Pipe Glands
BPI-25 Bulkhead Pipe Gland Fitting Reducer 25mm for BPG-50
- This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland Fitting. This will accept pipes between 22.5-25mm. These fittings provide a water and vapour tight seal between bulkheads. They are flexible and will accommodate some curved surfaces and pipe entry at an angle of up to 15 degrees. They are easy to fit and fully…
-
- Bulkhead Pipe Glands
BPI-32 Bulkhead Pipe Gland Fitting Reducer 32mm for BPG-50
- This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland Fitting. This will accept pipes between 28-32mm. These fittings provide a water and vapour tight seal between bulkheads. They are flexible and will accommodate some curved surfaces and pipe entry at an angle up to 15 degrees. They are easy to fit and fully serviceable…
-
- Bulkhead Pipe Glands
BPI-40 Bulkhead Pipe Gland Fitting Reducer 40mm for BPG-50
- This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland Fitting. This will accept pipes between 38-40mm. These glands provide a water and vapour tight seal between bulkheads. They are flexible and can accommodate some curved surfaces and pipe entry at an angle of up to 15 degrees. They are easy to fit and fully…
-
- Bulkhead Pipe Glands
BPI-OUT Bulkhead Pipe Gland Fitting Outboard Well Sealing Adaptor for BPG-50
- This adaptor offers a robust and reliable solution to seal the outboard motor well on small craft and is used in conjunction with the BPG-50 Pipe Gland Fitting. These fittings provide a water and vapour tight seal between bulkheads. They are flexible and will accommodate some curved surfaces and pipe entry at an angle of up to 15 degrees. They…
-
- Winch Handles & Accessories
Compact Winch Handle Mount
- Compact Winch Handle Mount 21055. This low profile, anti snag mount gives you a handy yet unobtrusive place to store your winch handle.
Catalogue
Browse our extensive ranges
