BPG-180 Bulk Head Gland 180mm OD
The Barton Bulkhead Pipe Gland BPG-100 is for pipes with an outer diameter between 160-180mm (6″5/16-7″1/16). The required hole cutter is 200mm. It has 12 M6 fasteners supplied.
These glands give a water and vapour proof seal between bulkheads. They are flexible and will accommodate curved surfaces and pipe entry at an angle. They are easy to fit and fully serviceable in situ.
Description
The Barton Bulkhead Pipe Gland BPG-100 is for pipes with an outer diameter between 160-180mm (6″5/16-7″1/16). The required hole cutter is 200mm. It has 12 M6 fasteners supplied.
These glands give a water and vapour proof seal between bulkheads. They are flexible and will accommodate curved surfaces and pipe entry at an angle. They are easy to fit and fully serviceable in situ.
Vapour and watertight construction
Seals the aperture for pipe and tube integration
Compatible for angled pipes and curved surfaces
Sealed but fully serviceable & adjustable
Stainless Steel and Nitrile Rubber (BS2751)
Suitable for bulks up to 35mm thick
