-
- 25mm T Section Track
25mm T Section Track
- £10.00
- 25mm T section track Drilled for fastenings and plunger stops. Grey anodised and supplied in metric lengths.
- This product has multiple variants. The options may be chosen on the product page
-
- 25mm T Section Track
25mm T Section Track End Caps (Pair)
- £10.00
- 25mm T Section Track End Caps
-
- 25mm T Section Track
Bullseye Slide Car (25mm)
- £10.00
- Bullseye slide With a swivelling bullseye that will always accommodate the correct angle of sheeting. Accepts lines up to 14mm diameter. A stainless steel insert is provided to prevent wear.
-
- 25mm T Section Track
Genoa Car Plunger Stop (25mm)
- £10.00
- Genoa car with plunger stop Features a precision turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy grip knob
-
- 25mm T Section Track
Genoa Slide Car (25mm)
- £10.00
- Genoa slides Designed with a heavy duty stainless steel attachment loop, through bolted and riveted for extra strength. These units will accept most Barton blocks.
-
- 25mm T Section Track
Mainsheet Slide Car (25mm)
- £10.00
- Mainsheet slides Designed with a heavy duty stainless steel attachment loop, through bolted and riveted for extra strength. These units will accept most Barton blocks.
-
- 25mm T Section Track
Nylon Sliding Cleats
- £10.00
- Sliding cleats A cost effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simply remove a genoa track end stop, slide on the cleat and lock it in the desired position.
- This product has multiple variants. The options may be chosen on the product page
-
- 25mm T Section Track
Plunger Stop (25mm)
- £10.00
- Plunger stops For use with mainsheet or genoa track sliders. Sold singly.
-
- 25mm T Section Track
Spinnaker Pole Slide Car (25mm)
- £10.00
- Spinnaker pole slide Features a heavy duty stainless steel ring welded to an attachment plate which is through-bolted to the slide. Generous ring opening to accept most pole ends.
-
- 25mm T Section Track
Stand up Block – Size 3
- £10.00
- Stand up block Have a stainless steel eye fitted to a stainless steel loop, through bolted for strength. The moulded plastic spring/gaiter prevents the block tumbling or ropes snagging. Two sizes are available - for 10mm and 12mm lines.
-
- 25mm T Section Track
Stand up Block – Size 4/5
- £10.00
- Stand up block Have a stainless steel eye fitted to a stainless steel loop, through bolted for strength. The moulded plastic spring/gaiter prevents the block tumbling or ropes snagging. Two sizes are available - for 10mm and 12mm lines.
-
- 25mm T Section Track
Stand up Block + Becket
- £10.00
- Stand up block Have a stainless steel eye fitted to a stainless steel loop, through bolted for strength. The moulded plastic spring/gaiter prevents the block tumbling or ropes snagging. Two sizes are available - for 10mm and 12mm lines.
