Mainsheet & Genoa Car Systems - Track 20mm/26mm/30mm

Per metre or in set lengths – choose from the adjacent table.

Hollow section extruded aluminium track for light weight yet retaining high load capacity.

'Spectro' grey anodised finish is extremely durable and adds to the friction-free efficient performance of these products.

Three styles of track are available – drilled, sliding bolt and beam:-

Drilled Track DiagramDrilled track

The most commonly used, drilled and countersunk at 100mm centres, with the first hole at 50mm from track end.

Specifications Size 1 Size 2 Size 3
Width Width W 20mm 26mm 30mm
Height Height 12mm 15mm 18mm
Fastenings Fastenings 5mm 6mm 8mm

Sliding bolt track

Sliding Bolt TrackTo allow for a smooth profile with no visible fastenings. Also makes retro fit an easier job, as bolts can be slid along the extrusion to match existing fastening holes.

Ensure washers are fitted beneath track to ensure a good seal (see diagram).

Specifications Size 1 Size 2 Size 3
Width Width W 20mm 26mm 30mm
Height Height 12mm 16.5mm 19mm
Fastenings Fastenings 5mm 6mm 8mm

Beam track

Beam Track DiagramUse beam track when spanning cockpits or companionway hatches, where unsupported length is required. A minimum of three fastenings should be used on either side of the unsupported length - place fastenings at 100mm centres in supported sections.

Ensure washers are fitted under the head of the bolt and between track & deck to ensure a secure seal (see diagram).

Specifications Size 1 Size 2 Size 3
Max unsupported length 400mm 700mm 800mm
Width Width W 20mm 26mm 30mm
Width W2 26mm 34mm 40mm
Height Height 27mm 34.5mm 40.5mm
Fastenings Fastenings 6mm 8mm 10mm