Beam Track End Cap (Pair)

Use beam track when spanning cockpits or companionway hatches, where unsupported length is required. A minimum of three fastenings should be used on either side of the unsupported length – place fastenings at 100mm centres in supported sections.

Ensure washers are fitted under the head of the bolt and between track & deck to ensure a secure seal.

Description

The maximum unsupported span of the beam track is
Size 1 = 400mm for yachts up to 8.5m (28ft)
Size 2 = 700mm for yachts up to 11.0m (36ft)
(Size 2 = 900mm for yachts up to 9.75m (32ft))

Additional information

Weight N/A
Dimensions N/A