BPG-50 Bulkhead Pipe Gland 50mm OD
The Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied.
These glands give a water and vapour proof seal between bulkheads. They are flexible and will accommodate curved surfaces and pipe entry at an angle. They are easy to fit and fully serviceable in situ.
Description
The Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied.
These glands give a water and vapour proof seal between bulkheads. They are flexible and will accommodate curved surfaces and pipe entry at an angle. They are easy to fit and fully serviceable in situ.
Vapour and watertight construction
Seals the aperture for pipe and tube integration
Compatible for angled pipes and curved surfaces
Sealed but fully serviceable & adjustable
Stainless Steel and Nitrile Rubber (BS2751)
Suitable for bulks up to 35mm thick
