Removeable Mainsheet Discs Fits 26mm Beam Track

Removeable Mainsheet Discs Fits 26mm Beam Track

The removable mainsheet track system, which is ideally suited for all yachts up to 11.0m (36ft)

This adaptable mainsheet track system is designed to span between the cockpit seats when sailing but is easily removed to give maximum cockpit space when you want to relax on board. A perfect solution for converting coach roof mainsheet sheeting systems to one that is within reach of the helmsman, offering greater sail control and safety.

The removable track system is available in two sizes and can be used on yachts up to a maximum of 11.0m (36ft). The track has a maximum unsupported length of up to 700mm (28in). It can be attached and removed in seconds and uses Barton?s beam section track.

All systems available in black anodised finish

2 in stock

Part No: 24090 Categories: ,

Description

Barton Marine’s removable track system is simple to install. End plates are bolted on both sides of the cockpit. Slide the track under these plates and then lift vertically, which automatically locks in position. To remove the mainsheet track, simply push in the locking pins on each side, lower the track and slide it out.

Complete removable mainsheet track system kits
Part no 20910 Suitable for yachts up to 8.5m (28.5ft)

  • Size 1 beam track 1m length
  • 1 pr removable mainsheet track plates
  • 4:1 traveller system with cleats on the traveller



Part no 24910 Suitable for yachts up to 11m (36ft)

  • Size 2 beam track 1m length
  • 1 pr removable mainsheet track plates
  • 4:1 traveller system with cleats on the traveller


The maximum unsupported span of the beam track is

Size 1 = 400mm for yachts up to 8.5m (28ft)

Size 2 = 700mm for yachts up to 11.0m (36ft)

(Size 2 = 900mm for yachts up to 9.75m (32ft))

Additional information

Weight 683 g
Dimensions 200 × 100 × 29 mm

Related products