BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50
This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5-20mm.
These glands provides a water and vapour tight seal between bulkheads. They are flexible and can accommodate some curved surfaces and pipe entry at an angle of up to 15 degrees. They are easy to fit and fully serviceable in situ.
Description
This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18-20mm
These glands provide a water and vapour tight seal between bulkheads. They are flexible and can accommodate some curved surfaces and pipe entry angle up to 15 degrees. They are easy to fit and fully serviceable in situ.
Vapour and watertight construction to comply with MCA Workboat Code 3 requirements.
Seals the aperture for pipe, tube and conduit integration
Compatible for angled pipes up to 15 degrees and curved surfaces
Sealed but fully serviceable and adjustable
Reduces vibration, noise and pipe chafing
316 Stainless Steel and Nitrile Rubber (BS2751)
Suitable for bulkheads up to 35mm thick
For more details see:
